Roland GK-2 - Page 6

First, check if all the following parts are supplied.
Tapping Flat A1 3x15 [mm] Pickup Spacer B
| x1 (For fixing GK-2)
Tapping Pan A1 3x20 [mm]
N
x10
x2 (For fixing Divided Pickup)
Pickup Spacer C
Spring
x2 (For adjusting the height of
Divided Pickup)
KA
Both-sided Adhesive Tape A
Both-sided Adhesive Tape B
Pickup Cussion x1 (For attaching the divided pickup)
LP Spacer
h
jf
x6 (Sponge type)