Need help?Do you have a question about the Roland GK-2 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | GK-2 |
| Category | Synthesizer |
| Language | English |
Jack for receiving the normal signal from the guitar into the Controller Unit.
Illuminates when the GK-2 is connected to the GR-50 via C-13A cable.
Controls the volume of the synthesizer sound output.
Detects guitar vibration and connects to bridge for synthesis.
Controls GR-50 functions like patch chain selection or parameter adjustment.
Controls GR-50 functions like patch chain selection or parameter adjustment.
Switches signal output between Guitar, Mix (Guitar+Synth), or Synth.
13-pin socket for connecting the GK-2 to the GR-50.
Crucial advice and precautions to observe before installing the GK-2 on the guitar.
Detailed instructions on positioning and securing the GK-2 unit onto the guitar body.
Methods for attaching the divided pickup using adhesive tape or screws.
Step-by-step guide for connecting the GK-2 to the GR-50 and the guitar.
Explanation of Synth Volume, Selector Switch, and S1/S2 switch operations.
To Next Page