106
Chapter 11 Appendices
❍Hold1
STATUS SECOND THIRD
BnH 40H vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127) 00H-3FH=OFF,
40H-7FH=ON
* Can be received only through the Basic channel when this channel is set to POLY1-
POLY16.
❍General Purpose #5
STATUS SECOND THIRD
BnH 50H vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127) 00H-3FH=OFF,
40H-7FH=ON
* Functions as Tap Tempo Teach.
* Can be received only through the Basic channel when this channel is set to MONO1-
MONO16.
❍General Purpose #6
STATUS SECOND THIRD
BnH 51H vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127) 00H-3FH=OFF,
40H-7FH=ON
* Can be received only through the Basic channel when this channel is set to MONO1-
MONO16.
* The specified function—MULTI-FX BYPASS, Arpeggiator, or Harmonist—will be
switched on or off for each Patch.
❍Genenal Purpose #7
STATUS SECOND THIRD
BnH 52H vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127) 00H-3FH=OFF,
40H-7FH=ON
* Can be received only through the Basic channel.
* Having received this message, the GR-33 acts as if the HOLD pedal is operated.
❍General Purpose #8
STATUS SECOND THIRD
BnH 53H vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127) 00H-3FH=OFF,
40H-7FH=ON
* Can be received only through the Basic channel.
* Having received this message, the GR-33 acts as if the CTRL pedal is operated when the
Arpeggio is held.
❍General Effect 1 (Reverb Send Level)
STATUS SECOND THIRD
BnH 5BH vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127)
* Can be received only through the Basic channel.
❍General Effect 3 (Chorus Send Level)
STATUS SECOND THIRD
BnH 5DH vvH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
vv=Control Value: 00H - 7FH (0 - 127)
* Can be received only through the Basic channel.
●Program Change
STATUS SECOND
CnH ppH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
pp=Program Number: 00H - 7FH (0 - 127) 0=prg.1 127=prg.128
* Can be received only through the Basic channel.
* The recognized Program Change Number corresponds to each patch as follows.
<When the patches of group A, b, C, or d are selected..>
1... 4 = A11...A14 65...68 = C11...C14
5... 8 = A21...A24 69...72 = C21...C24
9...12 = A31...A34 73...76 = C31...C34
13...16 = A41...A44 77...80 = C41...C44
17...20 = A51...A54 81...84 = C51...C54
21...24 = A61...A64 85...88 = C61...C64
25...28 = A71...A74 89...92 = C71...C74
29...32 = A81...A84 93...96 = C81...C84
33...36 = b11...b14 97...100 = d11...d24
37...40 = b21...b24 101...104 = d21...d24
41...44 = b31...b34 105...108 = d31...d34
45...48 = b41...b44 109...112 = d41...d44
49...52 = b51...b54 113...116 = d51...d54
53...56 = b61...b64 117...120 = d61...d64
57...60 = b71...b74 121...124 = d71...d74
61...64 = b81...b84 125...128 = d81...d84
* When you call the patches of the group E - H from the external device, send the value
"1" of the control change number 0 before sending Program Change message.
<When the patches of group E, F, G, or H are selected..>
1... 4 = E11...E14 65...68 = G11...G14
5... 8 = E21...E24 69...72 = G21...G24
9...12 = E31...E34 73...76 = G31...G34
13...16 = E41...E44 77...80 = G41...G44
17...20 = E51...E54 81...84 = G51...G54
21...24 = E61...E64 85...88 = G61...G64
25...28 = E71...E74 89...92 = G71...G74
29...32 = E81...E84 93...96 = G81...G84
33...36 = F11...F14 97...100 = H11...H24
37...40 = F21...F24 101...104 = H21...H24
41...44 = F31...F34 105...108 = H31...H34
45...48 = F41...F44 109...112 = H41...H44
49...52 = F51...F54 113...116 = H51...H54
53...56 = F61...F64 117...120 = H61...H64
57...60 = F71...F74 121...124 = H71...H74
61...64 = F81...F84 125...128 = H81...H84
* When you call the patches of the group A - d from the external device, send the value "0"
of the control change number 0 before sending Program Change message.
●Pitch Bend Change
STATUS SECOND THIRD
EnH llH mmH
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
mm,ll=Value: 00H, 00H - 7FH, 7FH (-8192 - +8191)
■Channel Mode Message
●All Note Off
STATUS SECOND THIRD
BnH 7BH 00H
n=MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16
* Can be received only through the Basic channel
* Turn off all notes that are now on.
To Next Page
Loading...
