Roland GR-33 - Calling up the Tuner Function with a Pedal

29
Chapter 3 Controlling Functions and Effects with the Base Module Pedals
Chap.
3
Calling Up the Tuner Function with a Pedal
1. While pressing [S1] on the GK-2A, step on Pedal 1
(TUNER).
* Perform this operation with “S1/S2 FUNCTION” set to
“Normal.”
The Tuner function is called up, and the following
appears in the display.
fig.3-03
2. Adjust the tuning.
For more detailed information and instructions for tuning,
refer to “Adjusting the Guitar Tuning (Tuner Function)” (p.
18).
3. After you have finished tuning, press any foot pedal or
press [S1] or [S2] on the GK-2A.
You will return to Play mode.
Note Name
String Number