Roland HP-207 - Changing the Volume Balance for Dual Play

42
Performing
You can change the volume balance of the Tones 1 and 2.
fig.Panel-Balance-e.eps
1.
Hold down the [Transpose] button and press the [Split] button.
The current volume balance is shown.
fig.d-DualBalance.eps
2.
Press the [-] or [+] button to change the volume balance.
The volume balance will change.
If you want to return to the original volume balance, press the [-] and [+] buttons simultaneously.
fig.d-DualBalance2.eps
3. Press the [Transpose] button or [Split] button to return to the tone select
screen.
You can use the Memory Backup function to store this setting in internal memory (p.
86).
Changing the Volume Balance for Dual Play
HP207_e.book 42 ページ ２００６年１２月２５日 月曜日 午前９時５２分