Roland HP-207 - Playing Sounds of an Audio Device through the HP207

89
Connecting to Other Devices
1.
Turn the volume all the way down on the
HP207 and on the audio device you’re about
to connect.
2.
Turn off the power to the HP207 and
connected audio device.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the connected audio device.
5.
Switch on the HP207.
6.
Adjust the volume level on the HP207 and the
connected audio device.
The sounds from the connected audio device are played
by the HP207.
Adjust the volume by using the controls of your
audio device.
Turning Off the Power
1.
Turn the volume all the way down on the
HP207 and on the audio device you’re about
to connect.
2.
Turn off the HP207.
3.
Turn off the connected audio device.
Playing Sounds of an Audio Device through the HP207
Input jacks
Audio System, etc.
Output (Line Out)
RCA pin-type Input jacks are
located to the lower right of the
front of the HP207.
They provide a convenient way to
connect portable audio devices.
HP207_e.book 89 ページ ２００６年１２月２５日 月曜日 午前９時５２分