Roland HP-207 - Performing with the Metronome; Changing the Tempo

46
Performing
You can perform while the metronome sounds. The HP207 provides a versatile
Metronome function.
You can adjust the volume or time signature of the metronome, and change the way that
beats are marked. If a song is playing, the metronome will sound at the tempo and time
signature of that song.
fig.Panel-Metronome-e.eps
1.
Press the [Metronome] button so it’s lit.
The metronome screen will appear, and the metronome will be heard.
The [Metronome] button flashes in red and green in time with the beat selected at that time.
The indicator lights in red on the downbeats, and in green on weak beats.
fig.d-Metronome.eps
You can change the sound of the metronome (p. 80).
Stopping the Metronome Function
1.
Press the [Metronome] button so its light is turned off.
1.
Press the [Tempo/Beat] button several times so it’s lit in red.
The tempo is displayed.
fig.d-MetronomeTempo.eps
2.
Press the [-] or [+] button to adjust the tempo.
The tempo is set in terms of the value of a quarter note, with possible values ranging from 10 up
to 500.
Performing with the Metronome
Changing the Tempo
HP207_e.book 46 ページ ２００６年１２月２５日 月曜日 午前９時５２分