Roland HP 237 - Chorus Effect for Dimension

Playing the Keyboard
Adding Breadth to the Sound-Chorus Effect
The HP 237 allows you to add chorus to what you play on the keyboard.
By adding the Chorus Effect, you can give the sound greater dimension, with more
fatness and breadth.
The settings of the Chorus Effect are memorized independently for each sound.
When the power is turned on, the Chorus Effect will be applied to the “Electric Piano 1”,
,
“Electric Piano 2” and “Vibraphone” sounds. The Chorus Effect will be turned off for the
other sounds.
“= Keone 077
la j AGG AAAG eo ee E
Press the [Chorus] button to turn on the indicator.
The Chorus Effect will be applied to the currently selected sound.
Chorus Chorus
Press Lit
When you select a sound for which the Chorus Effect has not been turned on, the
[Chorus] button indicator will go dark.
To cancel the Chorus Effect, press the [Chorus] button once again
to make the indicator go dark.
Chorus Chorus
=m |
Press Dark
MEMO While using the Dual (p. 14) or Split (p. 15) functions, lighting/extinguishing the
[Chorus] button's indicator will switch the Chorus Effect on/off for both sounds.
(However, when Split is being used, the Chorus Effect will not be applied to the
Acoustic Bass.)
After Dual or Split is cancelled, the piano reverts to the Chorus Effect setting that
a particular sound normally carries.
MEMO The on/off status of the [Chorus] button is not rementbered when Dual or Split are
EM i :
used.
MEMO The amount of Chorus can be changed. Please refer to “Changing the Depth of the
Chorus” (p. 25).
17