Roland HP 237 - Reverb;Chorus Depth Control; Damper Pedal Resonance

Convenient Functions
TEE
TE AN
I
S
e
I
TT
n
TE
ELL
OT
EES
Changing the Depth of the
Reverb
The depth of the Reverb Effect (p. 16) can be adjusted.
There are eight levels of depth from which to choose.
This is set to “4” when the power is turned on.
Holding down the [Reverb] button, press
any Tone button.
While holding down
8 More strongly
reverb
h Press one of these buttons
m Checking the depth of the Reverb
Effect
Press and hold the [Reverb] button.
The Tone button indicators will blink to indicate the
selected depth.
Changing the Depth of the
Chorus
The depth of the Chorus Effect (p. 17) can be adjusted.
There are eight levels of depth from which to choose.
This is set to “4” when the power is turned on.
Holding down the [Chorus] button, press
any Tone button.
129079 5 67 8 Deeper and
Bmt Cpe awat Pon ms ME MER. dgw see more spacious
12 OOOO OOOO chorus
PRAT MES
r
While holding down Press one of these buttons
m Checking the depth of the Chorus
Effect
Press and hold the [Chorus] button.
The Tone button indicators will blink to indicate the
selected depth.
Changing the Damper
Pedal’s Resonance
On acoustic pianos, when the damper pedal is depressed,
additional strings are released to resonate with the sound of
the keys that have been played, adding richness and breadth
to the sound. The damper pedal on the HP 237 recreates this
resonance when depressed. This resonance is called
“Sympathetic Resonance.”
Eight levels of resonance are available.
This is set to “4” when the power is turned on.
Holding down the [Reverb] and [Chorus]
buttons, press any Tone button.
1.2 3 4 5 6 7 8 | Deeper
Pang t aed Mie don ms resonance
ASS 0685
Wiite:holding:down Press one of these buttons
E Checking the Resonance level
Press and hold the [Reverb] and [Chorus]
buttons.
The Tone button indicators will blink to indicate the
selected depth.
(NOTE)
This resonance works only with Hie piano tones.
25