25
°
Connecting Your Equipment
Phones Jacks
Here you can connect stereo headphones.
This unit has two headphone jacks,
two people can also use headphones
simultaneously.
A Headphones 3D Ambience eect will be
applied, producing the sensation that the
sound is emanating from the piano itself even when using
headphones.
* The Headphones 3D Ambience eect applies only to piano sounds;
it does not apply to other sounds.
* The Headphones 3D Ambience eect does not apply if “Speaker
Auto Mute” is o (p. 24).
* You can also turn the Headphone 3D Ambience eect o (p. 6).
* You can use the [Ambience] button to adjust the Headphones 3D
Ambience eect.
Input Jack
If you connect an audio player or other audio playback device, the
sound of the audio playback device will be heard from the piano. Use
the Input/Bluetooth Vol. (p. 22) to adjust the volume of the device
that’s connected to the Input jack.
USB Computer Port
If you use a commercially available USB cable to connect
the piano’s USB Computer port to your computer’s USB
port, you’ll be able to do the following things.
5 SMF data played back by MIDI-compatible
software can be sounded by the piano.
5 MIDI data can be transferred between
the piano and your sequencer software
(sold separately), opening up a wide range of
possibilities for music production and editing.
USB Memory Port
You can do the following things using a USB ash
drive.
5 WAVE les or MIDI les (SMF) data copied from your
computer can be played back by the piano.
5 You can make audio recordings of your performances on
the piano.
5 The audio recordings of songs that you’ve made can be
played on your computer.
* Never turn o the power or disconnect a USB ash drive or the
power cord while the USB ash drive access indicator is blinking.
* Use a USB ash drive sold by Roland. We cannot guarantee
operation if any other USB ash drive is used.
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
To Next Page
Loading...
