24
Playing Ballads
This section explains how to select the piano tone for playing ballads. If use a pedal (sold separately), you can make
reverberate in the same way as if you were using the damper pedal on a piano. Use the “reverb” effect to add some
reverberation to your tone, as if you are playing in a concert hall.
Playing Ballads
Press the [PIANO] Button.
The piano tone is selected.
˚
Play the sample score.
Pedal—HOLD PEDAL
Try plugging a separately available pedal (DP series) into the HOLD PEDAL
jack on the back of JUNO-Di.
When you step on the pedal, the tone that you played is sustained as long
as the pedal is pressed (the same effect as the damper pedal on a piano).
Try using the pedal when you play.
The pedal can be assigned to other functions besides the
damper pedal. Refer to “Making Settings that are Common to
the Entire JUNO-Di (SYSTEM)” in the section “HOLD PEDAL”
(p. 75).
Selecting a Tone
Playing
[PIANO] Button
[REVERB] Knob
[PREVIEW] Button
Tone Buttons
1
Important
Function
Memo
JUNO-Di_e.book 24 ページ ２００９年６月２２日 月曜日 午前９時２３分
To Next Page
Loading...
