3.Rhythm Edit Mode
!
CONTROL
/
WAVE/LFO
Mute-Grp Mute Group Settings:
OFF/1
—
31
By numbering
the
Rhythm Tones, similarily numbered
Tones are treated as a Mute Group. A Mute
Group functions
such that when one Rhythm Tone
of
the
same group sounds, the other Rhythm
Tones will not sound (are muted).
Up
to 31 groups are available. When this
is set to OFF, the mute function
is
disabled.
Parameters Selected by WAVE/LFO
(1
Page)
^
I ~C2 N
Sw
i t-Gh I Gh-oup
1 No I
WfiUE a OH I I NT i 87
.:
LR Snare
i-'--s^m
Switch
Tone Switch Settings: ON/OFF
This determines whether the currently
selected Rhythm Tone sounds
(ON) or not (OFf^.
Group
Wave Group Settings: INT/EXP/CARD
This
determines the type
of
waveform
that is to be used in creating individual Rhythm
Tones,
just
as
with
normal
Tones.
Waveforms
can be selected from the internal
memory (INT), expansion board (EXP) and PCM cards
(CARD).
• Inserting the PCM Card
With the label side facing upward, gently (but
(irmly) insert the PCM card into the PCM CARD
slot on the rear panel.
^ The design of the CARD shown
in the
drawing differs from
an actual one.
EI
Wave Number
This
selects
a single waveform from the specified wave
group. The wave name of the set wave number
is
displayed
in parentheses
()
in the display.
144
To Next Page
Loading...
