EasyManua.ls Logo

Roland JV-80 - Page 54

Roland JV-80
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.PUYING
A PERFORMANCE
These parameters
control
how the
interna!
sound source
responds to
performance
data received
from the
controllers
oftheJV-80.
*
By
selecting
different
transpose
settings
for each
Part, you
can create
an ensemble effect.
For example,
it is
possible
to
play beyond
the range of
the keyboard,
if
you shift the
key range
of a bass sound down
an octave
and
shift that
for
a piccolo
up an octave. We
suggest that
you
use the
Coarse Tune
setting, which
is a Pan
parameter, to
adjust the
tunmg
of
the
sound
program,
and use (he
transpose
function to
adjust the tuning
for the performance
condition.
Instrument
sound
of the low
range
Instrument
sound
of
the high range
Shift
the key range
which
can
be played
on the main
keyboard.
^
The velocity
received
from
the main
keyboard
is processed
and sent to the
Part in the internal
zone.
Since it is
possible to
control how
each Part
is processed,
you can
change the volume
of each
Pan according
to
how
strongly
or
lightly
you play the
keyboard.
For example,
set the velocity
CUrve
to respond
quickly for
a Pan that is to
sound loudly. When
you
want
a
uniform velocity
response,
no matter how
softly or
strongly
you play, set the
Sensitivity
close to
0, and set the
strength
from
the Max
Velocity
parameter.
On the other
hand, when
you want
to emphasize
the velocity
difference,
set the sensitivity
to values
greater than
0.
It
is also
possible lo limit
the key
range of
each Pan to
different
areas of the
keyboard. This
is used to
temporarily
change
settings,
such as for
playing different
Parts with
each
hand. For example,
you could
play
a bass sound with
your left
hand and
a piano with
your right;
or you
could use the
function to
cut off higher
or
lower
range
sounds that
are displeasing
or
unnatural.
Processed
velocity
Velocity
from the
keys of the
main keyboard
The
same key velocity
can
be processed
in different ways
for different
Parts.
i^
The function
of the internal
zone Is
to process performance
data and send it
to
the Part. The
actual response
of the
sound to control
in the Performance
play
mode depends
on the Patch settings.
54

Related product manuals