Roland JV-80 - Page 75

4.System Common Parameters
CONTROL
/
MIDI
BBHsHil
Threshold Range:
—
127
This determines the value (threshold) at which aftertouch begins to affect the sound.
When
the aftertouch value
is
smaller than the threshold setting, it does not function. When the threshold is set to 127, it does not function either.
A
127
Aftertouch
threshold
MIDI
(5
pages)
The first page to be displayed
when
this button is pressed differs depending on the mode selected.
[When Patch Play mode is selected:]
PATCH MIDI Page
PRTCH
N
I
D I
Local I Rx~Chl Tx-Ch
ONI 1 I Rx-Ch
Local Switch Settings: ON/OFF
When
this is set to ON, the internal sound source of the JV-80 receives and responds to play data from the
instrument. When set to
OFF,
the sound source ignores the data.
This,
however, has no effect on the transmission
and reception
of MIDI data.
QgJI
Patch
Receive Channel
Range:
1—16
This determines
the MIDI
receive
channel in the Patch Play mode.
Tx-Ch
Transmit Channel Range: 1
—
1 6/Rx-Ch/OFF
This determines
the MIDI send channel in
the
Patch Play mode. The Rx-Ch
setting indicates
that the
transmission
channel
is
the
same as
that
of the
receive
channel.
It
does not transmit
when set to
OFF.
[When
Performance Play mode is selected:]
PERFORM MIDI
Page
PERFORM I
N I D I f
Local I Ctrl -Chi
ON ( OFF I
i»i»tsii
Local
Switch
Settings:
ON/OFF
When
this is set to ON, the internal sound source of the JV-80 receives and responds to play data from the
instrument. When
set to OFF, the sound source ignores the data. This,
however,
has no
effect
on
the transmission
and reception of MIDI data.
75