Roland JV-80 - Page 76

4.System Common
Parameters
I
MIDI
Ctrl-Ch
Control
Channel Range: 1
—
1 6/OFF
Distinguishing between the send
and receive channels of each Part of the
Performance, this determines the channel
for switching the Performances.
When this channel is set to the same
receive channel of a Part, switching of
Performances has
priority. Neither transmission or reception is possible
when this is set to OFF.
^ MIDI send and
receive channels of each Part are set with
the Performance
parameters.
TRANSMIT
MIDI/RECEIVE MIDI Page
TRflHSI-l IT tP
. CI Bnk I C , C I Uo 1 1 Bendl
Mod I flf t
M I D I #
OH I OH I OH I OH I OH I OH
I OH
RECE I UE tP . C I Bnk I
C
.
C
I Uo 1 1 Bend
1
Mod ! flf t
MIDI # OH! OH I OH I
OH B ONI OH I OH
P.C Bnk C.C Vol
Bend
Mod
Aft
Settings:
ON/OFF
When
set to ON, these
allow reception and transmission of the
corresponding MIDI data. Setting to OFF
disables
reception
and transmission of the data.
P.C Program
change
Bnk Bank
select
ac
Control change
( *}
Vol Volume
(
*
)
Bend
Pitch bend
(
*
}
Mod Modulation
(*)
Aft Aftertouch
(
*;
Data types w/hich are
nnarked
wfith
an asterisk
(*) cannot be
controlled by either
the JV-80 or
a pedal when
RECEIVE MIDI pages are set to
OFF.
SYS-EX MIDI Page
bVb-EK
tReceiMe I Unit-Ho
I
MIDI B OH I 17 1
Receive
Exclusive
Receive Switch Settings: ON/OFF
This turns on and off the JV-80's original MIDI data, such as Performance
data and Patch data.
Unit-No
Unit Number
Range:
17—-
32
When receiving
system
exclusive messages, set this to the same unit number of the
transmitting device.
76