Roland JX-10 - Page 44

Manual Version 3.21
Page. 44 of 73
OFF - RCV - SEND -
ON
OFF = JX-10 neither receives nor sends sys-ex data
RCV = JX-10 receives sys-ex data only
SEND = JX-10 sends sys-ex data only
ON = JX-10 sends and receives sys-ex data
OFF - RCV - SEND -
ON
OFF = JX-10 neither receives nor sends APR
RCV = JX-10 receives APR only
SEND = JX-10 sends APR only
ON = JX-10 sends and receives APR
When a program change is sent, the JX reloads the
Patch/Tones. With System Exclusive ON, the JX-10
was also sending all the patch and tones
parameters as 3 messages (1 Patch APR, 2 Tones
APR). Now, data sent over MIDI can be exactly
chosen.
OFF - RCV - SEND -
ON
OFF = JX-10 neither receives nor sends program
changes
RCV = JX-10 receives program changes only
SEND = JX-10 sends program changes only
ON = JX-10 sends and receives program changes
ON - OFF
Set to always ON when arpeggiator is in
EXTERNAL mode
1 - 16
Upper part MIDI channel freely selectable among 1-
16
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends program
changes
RCV = Upper receives program changes only
SEND = Upper sends program changes only
ON = Upper sends and receives program changes
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends aftertouch
RCV = Upper receives aftertouch only
SEND = Upper sends aftertouch only
ON = Upper sends and receives aftertouch
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends pitch bend
RCV = Upper receives pitch bend only
SEND = Upper sends pitch bend only
ON = Upper sends and receives pitch bend
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends modulation
RCV = Upper receives modulation only
SEND = Upper sends modulation only
ON = Upper sends and receives modulation bend
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends portamento
RCV = Upper receives portamento only
SEND = Upper sends portamento only
ON = Upper sends and receives portamento
ON - OFF
OFF = Upper neither receives nor sends CC#64 -
hold
RCV = Upper receives CC#64 - hold only
SEND = Upper sends CC#64 - hold only
ON = Upper sends and receives CC#64 – hold
OFF - RCV - SEND -
ON
OFF = Upper neither receives nor sends CC#7
RCV = Upper receives CC#7 only
SEND = Upper sends CC#7 only
ON = Upper sends and receives CC#7
1 - 16
Upper part MIDI channel freely selectable among 1-
16
OFF - RCV - SEND -
ON
OFF = Lower neither receives nor sends program
changes
RCV = Lower receives program changes only
SEND = Lower sends program changes only
ON = Lower sends and receives program changes
OFF - RCV - SEND -
ON
OFF = Lower neither receives nor sends aftertouch
RCV = Lower receives aftertouch only
SEND = Lower sends aftertouch only
ON = Lower sends and receives aftertouch
21 SYSTEM EXCLUSIVE
22 SYSEX APR
16 PATCH PROGRAM CHANGE
24 REALTIME
13 UPPER CHANNEL
31 UPPER PROGRAM CHANGE
32 UPPER AFTERTOUCH
33 UPPER BENDER
34 UPPER MODULATION
35 UPPER PORTAMENTO
36 UPPER HOLD
37 UPPER MIDI VOLUME
14 LOWER CHANNEL
41 LOWER PROGRAM CHANGE
42 LOWER AFTERTOUCH