Roland LEC-300A Supplement Manual

Supplemental Manual
This machine supports the ink.
This document describes important points regarding ink.
Please be sure to read this document.
Part of ”Setup Guide” has been changed with support of the ECO-UVS ink.
When you install the ink cartridges for the rst time, be sure to read ”Installing the Ink Cartridges” in page
2 of this document, or ”Installing the Ink Cartridges (LEC-330/ LEC-540/ LEJ-640)” in page 9.
Conditional selection of the ink type becomes available upon lling with ink
after the [HEAD WASH] menu is executed. In other words, you can switch
the ink type even after lling with ink.
For information on how to switch the ink type, please read ”Switching the
Ink Type” in page 17.
INK CONTROL
HEAD WASH
The content of “Installing the Ink Cartridges” has been changed.
The available operation after the [HEAD WASH] menu is executed
has been changed.
R2-110607

Roland LEC-300A Specifications

General

Print Technology	Inkjet
Print Width	300 mm
Resolution	1440 x 1440 dpi
Number of Colors	6
Power Supply	AC 100-240V, 50/60Hz
Media Types	Film
Ink Configuration	CMYK, White
Ink Colors	Cyan, Magenta, Yellow, Black, White
Media Thickness	Up to 50 mm
Media Width	300 mm
Connectivity	USB, Ethernet
Power Requirements	AC 100-240 V, 50/60 Hz
Type	UV-LED Printer