Roland VersaUV LEF2-200 User Manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manualcompletely and store it in a safe locaon.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specicaons of this product and the contents of this operaon manual are subject to change without noce.
• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors,
please inform Roland DG Corporaon.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur through use
of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur with respect
to any arcle made using this product.

Roland VersaUV LEF2-200 Specifications

General

Ink Configuration	CMYK + White + Clear
Print Technology	UV Inkjet
Print Width	508 mm (20 in.)
Ink Type	UV-curable ink
Media Thickness	Up to 1.97 inches (50 mm)
Connectivity	Ethernet (10BASE-T/100BASE-TX), USB
Power Supply	AC 100-240 V ±10 %, 50/60 Hz

Summary

Chapter 1 Basic Handling Methods

1. Basic Information

Provides fundamental information about the printer, including part names, object requirements, and menu structure.

Part Names and Functions

Object to Be Printed On

2. Basic Operations

Covers essential initial operations and checks before using the printer.

Power Supply Operations

Chapter 2 Output Method

1. Printing Operations

Guides through the entire printing process, from preparation to completion.

Printing method

Three Checks before Printing

Step1: Preparing for the Start of Daily Operations

Guides on initial setup steps to prepare the printer for daily operations and printing tests.

Step 2: Start Printing

Provides instructions on attaching the object and initiating the printing process.

Step 3: Head Refreshing after Daily Operations

Details the procedure for head refreshing to prevent print head clogging.

Chapter 3 Optimizing Quality and Efficiency

1. Optimizing the Setup Method

Covers methods to optimize the printer's setup for better results.

Adjusting the Height

Explains how to manually set the object height for optimal printing.

Adjusting the Distance between the Object to Be Printed On and the Print Heads

Enabling Automatic Height Adjustment during Printing

Print Area Settings

2. Optimizing the Printing Quality

Provides methods to improve and maintain print quality.

Preventing Ink Discharge Defects

Preventing Soiling of the Object to Be Printed On and Dot Drop-out

3. Optimizing Work Efficiency

Covers techniques to enhance the speed and efficiency of printer operations.

Using the Preset Function

Explains how to save and load printer settings as presets for efficient operation.

Reducing Print Time

Offers methods to shorten printing time, such as omitting print area settings.

4. Optimizing Operation Management

Provides guidance on managing printer operations effectively.

Managing the Operations Appropriately and Efficiently

Covers efficient management of printer operations and settings.

Setting the Date and Time

Setting the Start Timer

Determining What Happens When Ink Runs Out

Managing the Basic Settings of the Printer

Chapter 4 Maintenance

Important Notes on Handling and Use

Provides crucial safety and handling guidelines for the printer and ink cartridges.

Basic Maintenance Knowledge

Types and Timing of Maintenance

2. Regular Maintenance

Details routine maintenance tasks for daily and regular upkeep.

Cleaning the Machine

Details the daily procedure for cleaning the printer's internal components and flat table.

Replacing Ink Cartridges

Guides on checking ink levels and replacing ink cartridges when they are empty or expired.

Disposing of Discharged Fluid

Maintenance That Must Be Performed Daily

Lists essential daily maintenance tasks, including ink cartridge care and printing tests.

Printing Tests and Normal Cleaning

Explains how to perform printing tests and normal cleaning for print head maintenance.

Head Refreshing Method

Explains the process of head refreshing to prevent print head clogging.

When Normal Cleaning Is Not Effective

Offers solutions when normal cleaning fails to resolve print quality issues.

Medium Cleaning Method

Describes a more forceful cleaning method to address persistent print head clogging.

Powerful Cleaning Method

Details the most forceful cleaning method for severe print head blockages.

Manual Cleaning

Manual Cleaning Method

Chapter 5 Troubleshooting Methods

1. Print Quality Problems

Addresses common issues related to print quality and appearance.

Printed Results Are Coarse or Contain Horizontal Stripes

Print Head Related Quality Issues

Environmental and Installation Factors

Setup and Configuration Issues

Color Consistency Problems

2. Machine Operational Issues

Helps resolve problems related to the printer's mechanical and electrical functions.

Print Head Movement Failures

Provides troubleshooting steps if the print heads fail to move.

Printer Power and Startup Problems

Addresses issues where the printer unit fails to power on or operate correctly.

Connectivity and Software Issues

Mechanical Movement and Sensor Failures

Drain Bottle and Fluid Level Issues

3. Operation Panel Message Interpretation

Understanding Operational Prompts

Resolving System Error Codes

Details error messages and the actions required to resolve them.