Roland VersaUV LEC2-640 User Manual

• Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this
manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specications of this product and the contents of this operation manual are subject to change without notice.
• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors, please inform
Roland DG Corporation.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this
product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any
article made using this product.
R5-210825T
Setup Guide

Roland VersaUV LEC2-640 Specifications

General

Brand	Roland
Model	VersaUV LEC2-640
Category	Printer
Language	English

Summary

General Safety Precautions

Understanding Warning and Caution Notices

Machine Handling and Operational Safety

Heavy Machine Handling and Operation Warnings

Safety guidelines for lifting, moving, and installing the heavy machine, and preventing operational injuries.

Electrical and Fire Safety

Electrical Hazard and Fire Prevention

Precautions against electrical shorts, shocks, fires, and combustion risks.

Power Cord and Outlet Safety

Safe Power Cord and Outlet Practices

Ink, Fluid, and UV-LED Safety

Ink, Fluid Handling and Hazards

Safety measures for flammable/toxic ink/fluids and high-temp UV-LEDs.

Ultraviolet Light Hazard

Eye Protection from UV Light Exposure

Advises against prolonged direct exposure to UV light emitted by the machine.

Installation

Checks before Installation

Assembly and Ink Filling

Steps for assembling the machine and filling it with ink.

Installing the Cutting Tool