Roland VersaStudio BN-20 User Manual

MASTER GUIDE
Thank you very much for purchasing this product.
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this document and the specications of this product are subject to change without notice.
 The documentation and the product have been prepared and tested as much as possible. If you nd any misprint or
error, please inform us.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of
this product, regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to
any article made using this product.

Roland VersaStudio BN-20 Specifications

General

Media Handling	Roll-fed
Ink Type	ECO-SOL MAX
Maximum Print Width	18.9 in (480 mm)
Resolution	1440 x 1440 dpi
Media Width	20 inches
Interface	USB 2.0
Ink Configuration	CMYK or CMYK+White
Print Technology	Piezoelectric Inkjet

Summary

Chapter 1 The Basics

Introduction

Overview of the printer, its parts, and system configuration.

Switching Power On and Off

Detailed steps for powering the machine on and off safely.

Printing

Step-by-step guide for loading media and starting the printing process.

Chapter 2 Fully Utilizing the Machine

Cutting / Printing & Cutting

Procedures for adjusting and performing cutting operations with the machine.

Using Metallic Silver Ink

Guidelines for using metallic silver ink, including setup and data creation.

Utility : Other Function

Details on various utility functions for adjustments and settings.

Chapter 3 Maintenance

Introduction: About Maintenance

General information on the importance and schedule of machine maintenance.

Daily Maintenance

Routine cleaning and upkeep procedures for daily operation.

Periodical Cleaning Maintenance

Procedures for periodic cleaning to ensure optimal performance.

Replacing Consumable Parts

Instructions for replacing consumable parts like wipers and cutter blades.

Chapter 4 Appendix

Read this section whenever you face a problem

Troubleshooting guide covering common issues, error messages, and solutions.

Main Specifications

Technical specifications, dimensions, and environmental requirements for the machine.