Roland VersaStudio BN-20 - Replacing Consumable Parts

Periodical Cleaning Maintenance
76
Chapter 3 Maintenance
Chapter 3 Maintenance
Manual Head Cleaning
How often is Manual Head Cleaning needed?
Perform Manual Head Cleaning at least once a month.
To maintain reliable output conditions, perform Manual Head Cleaning at least once a month.
If the following problems are found, Manual Head Cleaning is recommended
If the following problems occur and any of the automatic cleaning functions have not solved the problem,
perform Manual Head Cleaning.
Please note that replacement of the wiper may also be an eective method to solve a problem.
 P. 78, “Replacing the Wiper”
Nozzle clogging Ink spots Dragged dirt
Dust and dirt stick to the
print heads and prevent
normal discharge of ink.
Ink gathers around dirt and
grime near the print heads
and ink drops are formed.
Dragging occurs when dirt
around the print heads
comes into contact with
media.
 When you need to order the cleaning sticks and cleaning uid for Manual Head Cleaning, please contact
us directly or your authorized Roland DG Corp. dealer.
 Print heads are consumable parts. Depending on the frequency of use, periodical replacement is required.
Please order them directly from us or your authorized Roland DG Corp. dealer.