Periodical Cleaning Maintenance
Chapter 3 Maintenance
75
Chapter 3 Maintenance
Click [Check Nozzle Condition].
Click [Test Print].
The test pattern is printed. Follow the on-screen instructions
to check for nozzle clogging.
Nozzle is clogged Proceed to
.
Nozzle is not clogged Click [Finish] to nish.
Select [Medium Cleaning] and click [Go].
Medium cleaning starts.
To check for nozzle clogging againReturn to
.
If the nozzle condition is not xed by "Medium Cleaning", perform "Powerful Cleaning".
When Powerful Cleaning Is Not Effective
If after several times of Powerful Cleaning, nozzle clogging is still found, perform [Manual Head Cleaning]. It is
most eective to periodically perform this level of cleaning in accordance with the frequency of use.
P. 76, “Manual Head Cleaning”
To Next Page
Loading...
