Roland VersaStudio BN-20 User Manual

Using Metallic Silver Ink
50
Chapter 2 Fully Utilizing the Machine
Chapter 2 Fully Utilizing the Machine
Layered Print (Metallic Silver  CMYK)
This section describes how to perform the layered print with the metallic silver ink and CMYK ink using the
metallic silver ink as background.
 P. 45, “Blend Print and Layered Print”
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYK ink is designated.
 P. 41, "Creation of Print Data Using Metallic Color (R-Works)," p. 43, "Creation of Print Data Using Metallic Color
(General Application for Drawing)"
(Image of printing method)
When using R-Works
Procedure

Create print data.
 P. 41, "Creation of Print Data Using Metallic Color (R-Works)"
The metallic silver ink and the CMYK ink are separated into the different
layers and printed in that order. (Metallic silver ink  CMYK ink)
Media
Metallic Silver
CMYK
The printed image
is to be seen from
this side (the printed
surface of the n-
ished results). of the
nished results).

Roland VersaStudio BN-20 Specifications

General

Media Handling	Roll-fed
Ink Type	ECO-SOL MAX
Maximum Print Width	18.9 in (480 mm)
Resolution	1440 x 1440 dpi
Media Width	20 inches
Interface	USB 2.0
Ink Configuration	CMYK or CMYK+White
Print Technology	Piezoelectric Inkjet