Roland VersaStudio BN-20 - STEP 4: Calibrate Sheet Feeding Amount

Printing
STEP 4: Calibrate Sheet Feeding Amount
Procedure

Open the Utility window.
 P. 7, "How to Open the Utility Window / Exit the Utility"

Click [Calibrate Sheet Feeding Amount].

Click [Test Print].
The test pattern is printed.

Read the on-screen instructions and then enter a value in the [New Value] box.

Click [Apply].
The value in [Present Value] changes to the value entered.

Click [Close].
22
Chapter 1 The Basics
Chapter 1 The Basics