Ink Switching Method
To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
The contents of this operation manual and the specications of this product are subject to change without notice.
The operation manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors,
please inform us.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use of this
product, regardless of any failure to perform on the part of this product.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
About this Manual
This manual explains how to switch the ink being used from ECO-SOL MAX ink (hereinafter called MAX ink) to ECO-SOL MAX 3
ink (hereinafter called MAX 3 ink).
*
To prevent the ink from mixing, perform operations according to the procedures given in this manual.
* The colors that can be switched to MAX 3 ink are cyan, magenta, yellow, and black. Colors with MAX 3 ink are dierent
than with
MAX ink
.
* For white and metallic silver, use
ECO-SOL MAX 2 ink (hereinafter called MAX 2 ink)
. Colors with MAX 2 ink are dierent than
with
MAX ink
.
ECO-SOL MAX ECO-SOL MAX3
To Next Page
