Roland VersaSTUDIO BN-20A User Manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual com-
pletely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please
inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
FA02621
R1-211008
http://www.rolanddg.com/
Copyright © 2021 Roland DG Corporation

Roland VersaSTUDIO BN-20A Specifications

General

Resolution	Maximum 1440 dpi
Cutting Force	30 to 300 gf
Ink Type	ECO-SOL MAX 2
Print Technology	Piezo inkjet
Maximum Print Width	18.9 inches (480 mm)
Ink Colors	Cyan, Magenta, Yellow, Black
Media Width	20 inches (508 mm)
Media Thickness	Maximum 1.0 mm (39 mil) with liner
Interface	USB
Power Requirements	AC 100 to 240 V ±10%, 50/60 Hz

Summary

Basic Operations

Switching Power On and Off

Guide to safely powering the machine on and off.

Printing Process

Step-by-step instructions for loading media and starting prints.

Optimizing Output Quality

Cutting and Printing Adjustments

Covers adjusting cutting force, speed, and print/cut alignment.

Performing Printing and Cutting Separately

Troubleshooting Methods

Output Quality Problems

Solutions for common print quality issues.

Media Feed Problems

Machine and Driver Problems

Handling Messages and Error Messages

Error Messages

Details common error codes and their solutions.