Roland VersaSTUDIO BN-20A - Important Notes When Performing Output from Coreldraw

MEMO
These are cautionary notes on making output from CorelDRAW using the BN-20 driver.
They are not applied when VersaWorks is used.
Set the document's color mode to [RGB].
If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated.In this case, it may
not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from
CorelDRAW differ.
Important Notes When Performing Output from
CorelDRAW
102 Important Notes When Performing Output from General Application