Part Names
Front
No. Name Function overview
Maintenance cover
Remove when performing manual head cleaning.
P. 70 "Manual Cleaning"
Front cover
Open the cover to load media; in general use, always keep the
cover closed.
Print-head carriage The print heads and blade are inside this section.
[POWER] key This switches the printer on and off.
Cartridge slots Location to install ink cartridges.
Pinch roller
When you move the loading lever to the front of the machine,
the media is pinched. The right pinch roller is fixed in place.
Platen
This is the path over which the media passes. A print heater
that helps fix the ink are built in.
Media clamps
These keep the media from coming loose and prevent fuzz on
the cut edge of the media from touching the print heads.
Blade protector This protects the tip of the blade during cutting.
Grit rollers These rollers feed out media toward the front of the machine.
Introduction
Basic Information 7
To Next Page
Loading...
