Roland VersaSTUDIO BN-20A - Creating Data for Cutting; Printing and Cutting

Creating Data for Cutting / Printing and Cutting
When using VersaWorks, refer to the [VersaWorks Help].
When using application software to create drawings
Verified application software
• Adobe Illustrator : after CS6
• CorelDRAW : after X3
1. Set the color that the BN-20 driver will identify as the cutting line
Procedure
1. Display the BN-20 driver's Printing Preferences screen.
P. 10 "How to Open the BN-20 Driver's Printing Preferences Screen"
2. Click the [Line Color] button from [CutLine Selection] on the [Printer Adjustment] tab.
The [Color]screen opens.
3. Click [Define Custom Colors].
The Color Settings screen opens allowing you to create colors.
Cutting / Printing and Cutting
42 Optimizing the Output Quality