Roland VersaSTUDIO BN-20A - Roland BN-20 A System Configuration

Roland BN-20A System Configuration
"VersaWorks 6" is written as "VersaWorks" in this manual.
System Configuration
Output is available in the following combinations.
• Commercial application software + BN-20 driver
• Commercial application software + VersaWorks + BN-20 driver
MEMO
When you use VersaWorks, the BN-20 driver's Printing Preferences become invalid.
Commercially available
application software
Verified application software
• Adobe Illustrator : after CS6
• CorelDRAW : after X3
VersaWorks
This is a software RIP (Raster Image Processor).
For more information, see "VersaWorks Installation Guide."
BN-20 Driver
Driver software that is needed to output printing data from a computer to the ma-
chine.
It is also used to set the printing preferences in the case that you use commercial
application software.
Utility
This is the necessary software to operate this machine. The major functions are
shown below:
• Display of messages and error messages
• Adjustment function
• Management of ink remaining amount
• Maintenance function
RELATED LINKS
・ P. 10 "How to Open the BN-20 Driver's Printing Preferences Screen"
・ P. 13 "How to Open the BN-20 Driver / VersaWorks Help"
・ P. 11 "How to Open the Utility Window / Exit the Utility"
・ VersaWorks Installation Guide
Introduction
Basic Information 9