Step 3: Printing Tests and Normal Cleaning
Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. Click [Check Nozzle Condition].
3. Click [Test Print].
The test pattern is printed. Follow the on-screen instructions and check for dot drop-out.
• Nozzle clogging occurs -> Proceed to 4
• Nozzles are not clogged -> Click [Close].
4. Select [Normal Cleaning] and click [Go].
Normal cleaning starts.
Printing
Basic Operations 29
To Next Page
Loading...
