VersaWorks : How to Perform Bidirectional Printing
In VersaWorks, the bidirectional printing is performed when "draft" is selected in printing quality. For
how to set the printing quality, see [Output Settings]>[Setting the Printing Quality] in Help of Versa-
Works.
Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. Click [Bidirectional adjustment].
3. Click [Test Print].
The test pattern is printed.
4. Read the on-screen instructions and then enter a value in the [New Value] box.
5. Click [Apply].
The value in [Current Value] changes to the entered value.
6. Click [Close].
Printing
28 Basic Operations
To Next Page
Loading...
