Replacing the Cutter Blade
When the cutter blade is blunt, the edge is chipped, or the cutting quality has deteriorated, replace
with a new cutter blade.
WARNING
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the knife with your fingers.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. In the [Replace Tools] tab, click [Replace Tools].
If the screen shown in the figure appears, open the front cover and replace the blade.
3. Remove the blade holder.
Replacing Parts for Maintenance
76 Replacing Consumable Parts
To Next Page
Loading...
