Roland VersaUV LEF2-200 Regular Maintenance Guide

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe locaon.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specicaons of this product and the contents of this operaon manual are subject to change without noce.
• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or
errors, please inform Roland DG Corporaon.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur through
use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur with
respect to any arcle made using this product.
R1-181211
Regular Maintenance Guide

Roland VersaUV LEF2-200 Specifications

General

Ink Configuration	CMYK + White + Clear
Print Technology	UV Inkjet
Print Width	508 mm (20 in.)
Ink Type	UV-curable ink
Media Thickness	Up to 1.97 inches (50 mm)
Connectivity	Ethernet (10BASE-T/100BASE-TX), USB
Power Supply	AC 100-240 V ±10 %, 50/60 Hz