Roland VersaUV LEF2-200 User Manual

Minimizing Print Head Movement
The print me is reduced by restricng the operang range of the print heads. This feature is eecve when the
print area or print data has a small width.
Procedure
1. Press [MENU].
2. Press [▼] to display the screen shown below.
MENU
SUB MENU
3. Press [▶].
4. Press [▼] several mes to display the screen shown below.
SUB MENU
FULL WIDTH S
5. Press [▶].
FULL WIDTH S
FULL OFF
6. Press [▲] or [▼] to select an item.
FULL WIDTH S
Explanaon
"PRTAREA" Adjust the operang range of the print heads to the preset print area.
"OFF" ""OFF"" matches the range of print heads movement to the print data. Movement is limited to
the minimum amount necessary, and this can be expected to yield the fastest prinng. When
this feature is used, the me needed for the ink to harden is not constant, and an uneven color
may result.
"FULL" (default seng) ""FULL"" makes the speed of the movement of the object to be printed on constant at all mes
and produces the most stable prinng results.
7. Press [ENTER] to conrm your entry.
8. Press [MENU], then [◀] to go back to the original screen.
MEMO
For print data whose width gradually narrows (e.g., an inverted triangle), even if "FULL WIDTH S" is set to "OFF", the movement
of the print heads may not match the print data. This is to prevent ink-curing failures caused by the print posion and is not a
malfuncon.
Reducing Print Time
3. Optimizing Work Efficiency 87

Roland VersaUV LEF2-200 Specifications

General

Brand	Roland
Model	VersaUV LEF2-200
Category	Printer
Language	English