Deacvang the Sleep Mode (Power-saving Feature)
This seng is used to set the machine so that it never goes into sleep mode (the state in which the power-saving
feature is working) when no print data is received and no operaons are performed for a connued length of me.
Procedure
1. Press [MENU].
2. Press [▼] to display the screen shown below.
3. Press [▶].
4. Press [▼] several mes to display the screen shown below.
5. Press [▶], then [▼] to display the screen shown below.
6. Press [▶] to display the screen shown below.
7. Press [▲] or [▼] to select an item.
EMPTY MODE
Explanaon
"ENABLE"(Default sengs) The sleep mode is acvated aer a certain period of me.
"DISABLE" The sleep mode is not acvated.
8. Press [ENTER] to conrm your entry.
9. Press [MENU], then [◀] to go back to the original screen.
RELATED LINKS
・ P. 98 "Seng the Acvaon Interval for Sleep Mode (Power-saving Feature)"
Managing the Operations Appropriately and Efficiently
4. Optimizing Operation Management 99
To Next Page
Loading...
Need help?
General