Roland M-12E - Page 3

Thank you for purchasing the Roland M-12E. The M-12E is a compact, versatile 12 channel mixer of high quality.
To take full advantage of this unit, please read this manual carefully.
Features
The M-12E is rack-mount(2U), 12 channel mixer with
microphone inputs and on-board equalizer.
The M-12E includes two types of send/return jack, one
_ of which can be divided into PRE/POST. Moreover, the
Channel Insert(ch.1-4) jacks allow for wider variation in
effect processing.
Similar to other M-series mixers, the M-12E produces
high quality sound with low noise output.
Separate monitor and master outputs are provided
allowing for individual level adjustment of each output.
The monitor input allows signals (such as a click tone
from a sequencer) to be monitored through the Monitor
Out or headphones.
XLR connectors (balanced output) are provide for
professional applications.
Send jacks include a Bus In, allowing you to “stack”
equipment.
A newly developed super-linear volume control is
employed in the input sensitivity circuit for smooth, ©
accurate level-setting(-60 dBm to +4 dBm).
Each channel includes a peak signal indicator and the
Master Section includes a Peak Meter and Pre-fader
Signal Indicator, for accurate level monitoring.
Important Notes
[Power Supply]
When making any connections with other devices,
always turn off the power to all equipment first; this will
help prevent damage or malfunction.
Do not use this unit on the same power circuit with any
device that will generate line noise, such as a motor or
variable lighting system.
Avoid damaging the power cord; do not step onit, place
heavy objects on it etc. |
[Placement]
Do not subject the unit to temperature extremes (eg.
direct sunlight in an enclosed vehicle). Avoid using or
storing the unit in dusty or humid areas or areas that are
subject to high vibration levels.
Using the unit near power amplifiers (or other equipment
containing large transformers) may induce hum.
Do not expose this unit to temperature extremes (eg.
direct sunlight in an enclosed vehicle can deform or
discolor the unit) or install it near devices that radiate
heat. 7
[Maintenance] |
For everyday cleaning wipe the unit witha soft, dry cloth
(or one that has been slightly dampened with water). To
remove stubborn dirt, use a mild neutral detergent.
Afterwards, be sure to wipe the unit thoroughly with a
soft, dry cloth.
Never use benzene, thinners, alcohol or solvents of any
kind, to avoid the risk of discoloration and/or deformation.