3
New functionality for scene memory
• A fade function has been added.
• Detailed settings have been added for the Recall Filter function, enabling the individual range to be set
independently for channels, DCA/MUTE groups, and effects.
The fade function makes parameters change gradually over a specific interval when a scene memory is recalled.
The fade function can be set individually for each scene.
The parameters for which the fade function is enabled are shown below.
• Faders for the respective channels
• Pan (or balance) for the respective channels
1. At the SCENE MEMORY section, press [DISP].
The SCENE screen is displayed.
When the fade function is enabled for a scene memory, FADE is displayed in the STATUS field for the scene memory
on the scene list at the SCENE screen.
Fade function
Using the fade function
To Next Page
Loading...
