7
Added effect types
This is a chorus modeled on the Boss CE-1 Chorus Ensemble.
The original has mono in and mono out (or wet/dry out) specifications, but the modeling adds a mode selection
switch that also enables use as an effect with stereo in or stereo out specifications. The modeling also provides a
level knob for adjusting the output level.
The CE-1 was launched in 1976 as the first Boss-brand product.
◆Functioning of function buttons
CE-1(Chorus Ensemble)
Parameter (name) Setting value Remarks
mode (mode selection switch)
mono
Signals input to IN L and IN R for use as mono in or mono out
effects are mixed.
The same signal is output from OUT L and OUT R.
mono-st
Used as effects for mono in or wet/dry out
(OUT L: wet out, OUT R: dry out)
stereo Used as effects for stereo in or stereo out
level (level) 0 – 100 Adjustment of output level
chorus intensity (chorus intensity) 0 – 100 Adjustment of chorus effect
vibrato depth (vibrato depth) 0 – 100 Depth of vibrato effect
vibrato rate (vibrato rate) 0 – 100 Cycle of vibrato effect
normal/effect Sw
(switch between normal and effect)
normal No effects applied
effect Effects applied
vibrato/chorus Sw
(switch between vibrato and chorus)
vibrato Vibrato effect
chorus Chorus effect
Button Function
[ F1 (ON) ] Switch between normal and effect
[ F2 (DIRECT) ]
Output/no output of direct sound
(effective only when mode switch is set to stereo)
[ F4 (ST MOD INVERT)]
Inversion/no inversion of modulation effect during stereo
(effective only when mode switch is set to stereo)
[ F5 (CHORUS) ] Switch to chorus
[ F6 (VIBRATO) ] Switch to vibrato
To Next Page
Loading...
