78
Copying and Initializing a Patch/Rhythm Set
Copying a Patch Tone
Here’s how the tone settings of a patch can be copied to the specified
tone of the currently selected patch.
1.
In the top screen of patch / sample mode, move the
cursor to the copy-destination patch.
2.
Press [F2 (Edit)] to access the edit screen.
3.
Press [F5 (Tone Copy)].
The Patch Tone Copy window will appear.
4.
Use [CURSOR] and [VALUE] to select the copy-
source patch and tone, and the copy-destination
tone.
5.
Press [F6 (Execute)].
A message will ask you for confirmation.
6.
Press [F6 (Execute)] to execute.
* To cancel, press [F5 (Cancel)].
If you press [F4 (Compare)] in step 4 so a “
✔
” appears in the check
box, you can use the velocity pads to play the copy source patch.
Initializing a Patch
Here’s how the settings of the currently selected patch can be
returned to their default values.
1.
In the top screen of patch / sample mode, select a
part assigned a patch.
2.
Turn [VALUE] to select the patch that you want to
initialize.
3.
Press [F2 (Edit)] to access the edit screen.
4.
Press [F4 (Patch Init)].
A message will ask you for confirmation.
5.
Press [F6 (Execute)] to execute.
* To cancel, press [F5 (Cancel)].
Copying a Rhythm Tone (Key)
Here’s how the rhythm tone (percussion sound) settings of a rhythm
set can be copied to the specified rhythm tone of the currently
selected rhythm set.
1.
In the top screen of patch / sample mode, move the
cursor to the copy-destination rhythm set.
2.
Press [F2 (Edit)] to access the edit screen.
3.
Press [F5 (R.Tone Copy)].
The Rhythm Tone Copy window will appear.
4.
Use [CURSOR] and [VALUE] to select the copy-
source rhythm set and rhythm tone, and the copy-
destination rhythm tone.
5.
Press [F6 (Execute)].
A message will ask you for confirmation.
6.
Press [F6 (Execute)] to execute.
* To cancel, press [F5 (Cancel)].
If you press [F4 (Compare)] in step 4 so a “
✔
” appears in the check
box, you can use the velocity pads to play the copy source rhythm
set.
Initializing a Rhythm Set
Here’s how the settings of the currently selected rhythm set can be
returned to their default values.
1.
In the top screen of patch / sample mode, select a
part assigned a rhythm set.
2.
Turn [VALUE] to select the rhythm set that you want
to initialize.
3.
Press [F2 (Edit)] to access the edit screen.
4.
Press [F4 (Rhythm Init)].
A message will ask you for confirmation.
5.
Press [F6 (Execute)] to execute.
* To cancel, press [F5 (Cancel)].
Parameter
Value Description
Source
Patch Bank
Current,
Preset A–G,
User, Card
Bank of the copy-source patch
To specify the currently selected
patch as the copy-source, set this
to “Current.”
No. 1–128 Patch number of the copy-source
If Patch Bank is set to “Current,”
this cannot be selected.
Source
Patch Tone
1–4 Copy-source tone at the copy-
source patch
Destination
Temporary
Patch Tone
1–4 Copy-destination tone at the cur-
rently selected patch
Parameter
Value Description
Source
Rhythm
Bank
Current,
Preset A,
User, Card
Bank of the copy-source rhythm set
To specify the currently selected
rhythm set as the copy-source,
set this to “Current.”
No. 1–128 Rhythm set number of the copy-
source
If Rhythm Bank is set to “Cur-
rent,” this cannot be selected.
Source
Rhythm Key
B3–D5 Copy-source rhythm tone (key) at
the copy-source rhythm set
Destination
Temporary
Rhythm Key
B3–D5 Copy-destination rhythm tone
(key) at the currently selected
rhythm set
MC-909_Ref_e.book 78 ページ ２００５年３月１日 火曜日 午後３時２９分
To Next Page
Loading...
