84
Song editing
“Song editing” is the process of editing individual steps of
performance data for a song.
* You must stop the song playback before you can edit the song.
1.
Select the song that you want to edit.
2.
In Song mode, press [F2 (Song Edit)] to access the
Song Edit screen.
fig.3-04
Type of song editing
Clear All Steps
This operation clears all of the steps that you input, returning them
to the blank condition. Use this when you want to create a song from
scratch.
1.
Press [F1 (Clear All)].
A message will ask you for confirmation.
2.
If you are sure that you want to clear all steps, press
[F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Delete Step
This operation deletes an unwanted step from the song, and joins the
two sections.
fig.1-54
1.
Use [VALUE] or [INC/DEC] to select the step that you
want to delete.
2.
Press [F2 (Delete)].
The selected step will be deleted.
Insert Step
This operation inserts a step into the song, and moves subsequent
steps backward by one.
fig.1-56
1.
Use [VALUE] or [INC/DEC] to select the step at which
you want to insert a pattern.
In the example shown above, select step 2.
2.
Press [F3 (Insert)].
A step containing the same pattern as the step you selected in
step 1 will be inserted, and the subsequent steps will be moved
backward by one.
Song Copy
This operation copies song data to a different song.
1.
Press [F4 (Copy)].
2.
Select the copy-destination song.
3.
Press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
If the copy destination contains data, that data will be erased when
you execute this copy operation.
[F1 (Clear All)]
(Clear All Steps)
Erase all steps.
[F2 (Delete Step)] Delete an unwanted step.
[F3 (Insert Step)] Insert a step.
[F4 (Copy)]
(Song Copy)
Copies a song to a different song.
[F6 (Close)] Returns to the previous screen.
123456
12345
MC-909_Ref_e.book 84 ページ ２００５年３月１日 火曜日 午後３時２９分
To Next Page
Loading...
