Roland MT-32

5}
WRITING TIMBRE DATA TO
MEMORY
The MT-32 is capable of storing up to
64
different timbres
at
memory locations that are not
used
by the built-in
timbres.
6)
RHYTHM PART CONTROL
Any key
number
between
24 and 87 is
accessible to the user for
the following-functions:
FUNCTION DESCRIPTION
ADJUSTABLE
RANGE
Timbre Selects the timbre. R:
01 to 30
} : 01
to 64
Output ievei
Adjust the output volume,
Oto
100
Pan-pot Adjust the stereo balance.
1
5-steps
between
L
and
R
Reverb
switch
Turns the reverb effect on
and off
ONorOFF
7)
DATA
TRANSFER
The MT-32 allows bulk dump or
load
of
all
memory-resident data.
*The MT-32 does not
allow bulk
dump (data
transfer)
unless it
receives a
request-to-send
message
from a
remote
instrument.
Therefore,
data transfer is not
possible
between
MT-32 units.
26