Roland MT-32

The
MT-32 incorporates
a 128-timbre sound library
that
lets you
select
sounds
for any
of the non-rhythm parts.
The
sound source block allows
you to
piay up
to
thirty-two notes
for
the
eight parts
simultaneously, each
of
which may
consist
of
any
number of
notes
within the
upper
limit. (The
exact voicing
capacity allowed,
however,
varies
with
the timbres you select.
See
page
22
for details.)
The MT-32
works in
conjunction with
a
MID!
keyboard,
sequencer
{a device that stores musical data for playback at
the
desired
timing),
and other instruments that generate
MIDI
data.
The
MT-32
applications are roughly
broken down
into
the
follow-
ing
two
categories.
See
the corresponding
section for
a
full
ex-
planation.
(1)
Using
the
MT-32 with the Roland Piano,
the
Roland PR-100
Digital Sequencer,
and
Roland PR-100 Pre-Recorded
Software
-+
See Section
[2]
"USING
THE MT-32
WITH ROLAND
PR-100
PRE-RECORDED
SOFTWARE"
{page
8).
(2)
Using
the
MT-32 with
a sequencer loaded
with
your own
data
-+
See Section
[33
"USING THE MT-32
WITH ORIGINAL
DATA"
(page
10},
7