15
Using the velocity pads
Using the velocity pads
Switching the pad bank
By switching the “pad bank” you can use the sixteen pads on the top panel to
play a larger number of materials.
1
Press .
The PAD BANKS pop-up will appear.
2
Use the VALUE dial to select a
pad bank and press
(SELECT).
The pad bank will be switched.
3
Strike the to play
sounds.
You will hear the sounds that are assigned
to the newly-selected pad bank.
Switching the patch of a part
Here's how to switch the patch (instrument) used by the part for a MIDI track,
so that you can play a different sound from that part.
1
Press .
The SEQUENCE screen will appear.
2
Use the cursor buttons to
choose a MIDI track as the
current track.
In the SEQUENCE screen, the pads will
play the sounds of the current track. The
track number that is the current track will
be highlighted.
The number of pad banks
depends on the type of the
current track.
• MIDI tracks = 6 pad banks
(96 notes=6 pad banks x 16
pads)
• Audio tracks = 32 pad
banks
(512 phrases = 32 pad banks
x 16 pads)
“Patches” are used by MIDI
tracks. If you select an audio
track, you will not be able to
switch the patch.
MIDI track
Current track
(highlighted)
QuickStart_e.book 15 ページ ２００５年４月２８日 木曜日 午後９時３５分
To Next Page
Loading...
