8
Preparations and concepts
Basic operations
Moving the cursor
Each screen displays various parameters (items to set) or menus (items to
select). To edit the value of a parameter, move the cursor to the value you
want to edit. To select a menu item, move the cursor to the desired item. The
cursor is enclosed in a frame as shown below.
Use to move the cursor.
●
Finalizing a menu selection
Press to finalize the selected menu item. The selection or command
(operation) will be executed.
Editing the value of a parameter
To edit the value of a parameter, use the VALUE dial or [DEC]/[INC].
●
VALUE dial
Turn the VALUE dial toward the right
to increase the value, or toward the
left to decrease it.
●
[DEC]/[INC]
Press to increase a value. Press to decrease a value.
Using the F (function) buttons
The top panel F buttons ( – ) have various
functions assigned to them depending on the
screen shown in the LCD. These buttons
correspond one-to-one with the function names
shown at the bottom of the LCD.
Cursor
Cursor (highlighted)
Black characters
on white background
(value display)
If functions are shown at the
bottom of the LCD, you can
use the F buttons to select
them directly.
To edit a parameter value,
move the cursor to an area
displayed in black characters
on a white background.
decrease increase
You can hold down [SHIFT]
and use the VALUE dial or
[INC][DEC] to change a value
in larger steps.
You can continue holding
down [DEC] or [INC] to make
the value continue changing
(“repeat”). At this time, you
can hold down the other
utton as well to make the
value change even faster
(“turbo repeat”).
QuickStart_e.book 8 ページ ２００５年４月２８日 木曜日 午後９時３５分
To Next Page
Loading...
