25
Assembling additional materials
Assembling additional materials
5
Set the parameters in the QUICK
ASSIGN (PATCH) screen.
●
(Example) If you want to assign the imported sound to C4 ...
6
Press (Set).
The file will be imported. You can play the
sound as described in Using the velocity
pads (p. 13).
If you want to import another sample,
repeat the procedure from step 4.
Parameter and setting
Result
Make Keyboard setting
unchecked (Drum mode)
With this method of assignment, the playback
pitch will be the same as the pitch during
sampling.
Assign To= 3-08 (C 4)
The sound will be assigned to C4. You may
specify a range in which the same sound is
assigned to all notes in the range.
For details on settings for other
parameters, refer to Owner’s
Manual p. 359.
In the following cases, pressing
[F4 (Assign All)] will assign
sounds consecutively, starting
with the Assign To setting (in
the example, C4, C#4, D4, ...).
• When importing two or
more samples
• If Make Keyboard= off
(drum mode)
• If the Assign To region is a
single note
QuickStart_e.book 25 ページ ２００５年４月２８日 木曜日 午後９時３５分
To Next Page
Loading...
