Roland MV-8800 - Page 48

Effect Block
A-48
MV-8800 Appendices
Chorus
This effect adds breadth to the sound, making it “fatter.”
Rate
Value: 0–100
This sets the chorus modulation cycle time.
Depth
Value: 0–100
This sets the chorus modulation depth.
Ch-R Modulation
(Right Channel Modulation Phase)
Value: NonInv, Inv
This is ordinarily set to NonInv. When set to Inv (Invert),
the modulation (rising and falling sound) in the right
channel is inverted against the left channel. This gives
an effect in which the modulation in the left and right
channels is reversed.
Effect Level (Effect Level)
Value: 0–100
This adjusts the chorus volume level.
Direct Level
Value: 0–100
This adjusts the volume level of the direct sound.
■ Other effect blocks
• NS (Noise Suppressor) (p. 21)
• Enhan (Enhancer) (p. 20)
• EQ (3 Band EQ) (p. 18)
• Delay (p. 44)
MV-8800_a_e.book 48 ページ ２００６年１１月１０日 金曜日 午前１０時１９分