Why does recording with a mono mic create a stereo file on my Roland R-07 Recording Equipment?
The R-07 records in stereo. If you connect a mono mic, a stereo file with the same sound on the left and right (L, R) tracks will be created even if EXT Mic Type is set to “MONO.”
Why is the volume of the device connected to the MIC/ AUX IN jack on my Roland R-07 too low?
If the volume of the device connected to the MIC/ AUX IN jack is too low, you might be using a connection cable that contains a built-in resistor. Please use a connection cable that does not contain a resistor.
General| Sample rate | 96 kHz |
|---|---|
| Audio quality | 24 bit |
| Frequency range | 20 - 40000 Hz |
| USB 2.0 ports quantity | 1 |
| Product color | Black |
Weight and Dimensions| Weight | 150 g |
|---|---|
| Dimensions (WxDxH) | 61 x 103 x 26 mm |
Step-by-step guide on how to turn the R-07 unit on and off.
Guide to setting the internal clock for accurate file timestamping.
Instructions on how to select the correct battery type for optimal management.
Explains how to use pre-defined 'scenes' for different recording situations.
Guide to selecting Sample Rate and Rec Mode for desired audio quality.
Instructions for using the rehearsal function to set automatic recording levels.
Details on how to use the rehearsal function to set input levels.
Step-by-step guide on how to start, pause, and stop the recording process.
Instructions on how to select and play recorded files directly on the R-07.
Steps to download and install the dedicated mobile application for remote control.
Procedure to enable remote control functionality on the R-07 unit.
To Next Page
