● Added the parameter "Clock Out" in "System Settings." This parameter
can control ON/OFF settings for transmitting the F8(Timing Clock)
message.
[ Ver.1.03 ]
● Alleviated the feelings of the tone interrupting when performing with
layered tones using combinations of Piano and Strings.
● The following bug is fixed.
○ When receiving the Data Request (RQ1) messages of the
System Exclusive messages, the requested data was not
output.
What you will need to update your RD-700NX
● RD-700NX
● USB Memory ( Roland's M-UF2G is recommended )
* The USB Memory needs to be formatted on a RD-700NX.
● A computer with a USB connector (Windows XP/Vista/7, MacOS X v10.4.3
or later)
● Update file
Cautions with the update
● When you perform this update, it will initialize your Live Set that was saved
in the User bank.
You should save the Live Set on a USB memory before you perform the
update.
Refer to the following section from the Owner's Manual for the detailed
procedure.
○ Saving a Live Set File ( LIVE SET Save )
Call up the Live Set from the USB memory after the update completes.
● We recommend that you back up your Live Set files and Songs stored in the
internal memory to a USB memory before you perform the update although
RD-700NX keeps the data with normal updating.
Refer to the following section from the Owner's Manual for the detailed
procedure.
○ Copying a Live Set File ( LIVE SET Copy )
○ Copying a Song (SONG Copy)
● Never apply this update data to any product other than the RD-700NX. This
update data may destroy the data or system program of other products.
● Never power-off your RD-700NX while the update is in progress!
● If a power failure or similar accident occurs during the update process, the
RD-700NX won’t be able to start up in normal operating mode. This will
require servicing, so you will need to contact Roland service center near
© 2012 Roland Corp. U.S.