Need help?Do you have a question about the Roland rubix 44 and is the answer not in the manual?
General| Sample Rate | Up to 192 kHz |
|---|---|
| Bit Depth | 24-bit |
| Direct Monitoring | Yes |
| USB | USB 2.0 |
| Audio Interface | USB |
| Inputs | 4 |
| Outputs | 4 |
| Phantom Power | Yes (+48V, switchable on inputs 1-2) |
| Compatibility | Windows, macOS |
| Headphone Output | 1 |
| MIDI I/O | Yes (5-pin DIN) |
Details the knobs, buttons, indicators, and connectors on the Rubix22 front panel.
Explains the rear panel ports for power, MIDI, and audio outputs.
Highlights the specific controls of the Rubix24 front panel, like compressor.
Describes the Rubix44 front panel, focusing on its expanded input section.
Guide for installing the USB driver and connecting the Rubix to Windows.
Instructions for connecting the Rubix to Mac without driver installation.
Steps for connecting the Rubix to an iPad for mobile audio use.
Procedure to remove the Rubix USB driver from Windows systems.
How to configure audio drivers and check sound output in DAW and OS.
Adjusting USB buffer size for latency and stable audio playback.
Connecting for audio monitoring and sending signals to DAW for recording.
Explains the COMP1, COMP2, and LIMIT settings for audio processing.
Solutions for USB driver download, installation, and uninstallation errors.
Fixes for issues like no sound, quiet audio, or recording level problems.
Step-by-step guide to configure MIDI ports and connections on Mac OS X.
Visualizes the signal flow for Rubix22, Rubix24, and Rubix44 models.
Comprehensive technical data and characteristics for all Rubix models.
To Next Page
